1″ Bevel Slat Tambour – Thin

Select Size

Select Wood Species

From $45.04

Original: $128.68

-65%

1″ Bevel Slat Tambour – Thin—

$128.68

$45.04

Select Size

Select Wood Species

From $45.04

Original: $128.68

-65%

1″ Bevel Slat Tambour – Thin—

$128.68

$45.04

The Story

White River Hardwoods · Tambour Collection

1″ Bevel Slat Tambour

Name: 1″ Bevel Slat Tambour – Thin
Brand: White River Hardwoods
SKU: 1-bevel-slat-tambour-thin-usually-ships-in-7-10-business-days
Availability: InStock

Thin Profile · Flexible & Solid Backing · Made in the USA

The classic 1″ bevel slat in a thin, highly flexible profile — bringing the most specified profile in the tambour line to a wider range of curved and flexible applications.

The classic profile, made more flexible — the 1″ bevel slat thin goes where standard thickness cannot.

Available Options

Size & Species

Size	Backing	Available Species
12″W × 48″L	Flexible	Red Oak, Paint Grade, Hard Maple, Walnut, White Oak
12″W × 96″L	Flexible	Red Oak, Paint Grade, Hard Maple, Walnut, White Oak
24″W × 48″L	Flexible	Red Oak, Paint Grade, Hard Maple, Walnut, White Oak
24″W × 46″L	Solid Backing — Does Not Flex	Red Oak, Paint Grade, Hard Maple, Walnut, White Oak, Cherry, Alder

* Cherry and Alder are exclusively available in the 24″W × 46″L Solid Backing format.

Why This Profile

The Profile in Detail

◢

Classic Bevel, Thin Build

All the visual character of the standard 1″ bevel slat with reduced thickness for greater flexibility — the right choice when curves are part of the design.

↩

Enhanced Flexibility

The thin profile allows tighter bend radii than the standard bevel slat, expanding the range of curved architectural applications available.

🌲

7 Species Available

Red Oak, Paint Grade, Hard Maple, Walnut, White Oak, Cherry, and Alder. The 1″ bevel thin in White Oak is a particularly popular contemporary specification.

📐

Specifier's Choice

When the 1″ bevel slat standard profile needs to navigate a curve, this is the specification. Consistent geometry, reliable performance, flexible format.

Technical Specifications

Key Facts

Profile

1″ Bevel Slat

Slat Width

1″

Profile Type

Thin

Panel Sizes

12×48, 12×96, 24×48, 24×46

Backing

Flexible or Solid (24×46)

Use

Interior Only

Before You Install

Storage, Handling & Acclimation

Acclimate First — Always

On receipt, store flat in a controlled interior environment. Allow 24–48 hours to acclimate before finishing or installing. This stabilizes moisture content and reduces post-install movement. Before you begin, lightly roll and unroll each panel to flex the backing — hold the rolled position for 5+ seconds, then return flat.

Interior Use Only

Tambour panels are not suitable for wet or high-humidity environments including showers, bathrooms, or pools. Always install in a space with standard room temperature and humidity.

Installation

Step by Step

Prep the Surface

Wall must be clean, sound, and free of dust, grease, or debris. Apply primer to porous substrates for better adhesion.

Dry-Fit First

Always dry-fit before committing adhesive. Install vertically or horizontally — confirm your layout before you spread anything.

Apply Adhesive

Use PVA, contact, epoxy, or a quality panel adhesive (e.g., Titebond Fast Grab FRP). Trowel for 80–100% coverage to within ¼″ of edges. With a gun, run beads around the perimeter and horizontal beads every 4–6″.

Press & Secure

Apply firm, uniform pressure across the full panel. Use a ¾″ sacrificial board when tapping or hammering. For curved applications, temporary bracing until the glue sets ensures clean contact.

Leave Micro-Gaps

Leave a hairline gap between adjacent panels — roughly two stacked business cards — to accommodate natural wood movement over time.

Clean Up

Clean any adhesive squeeze-out immediately to avoid residue on slat faces.

Installer Advice

Pro Tips

Pre-Stretch Inward

Before attaching, roll the panel inward to stretch the backing. This makes it more compliant and easier to handle, especially on curved surfaces.

Flex Outward with Intent

Follow up by flexing outward firmly to fully stretch the paper backing. A properly stretched panel lays flatter and adheres more evenly.

No Cabinets Through Tambour

Never mount cabinets or furniture through the panel into the wall. Wood movement can cause buckling and will void the warranty.

Trade Program

13% Trade Discount for Design Professionals

Architects, interior designers, and contractors qualify for White River's trade discount on tambour panels. Volume pricing available for larger orders — contact your rep for a quote.

Apply for Trade Access

Warranty Reminder

Warranty may be voided if panels are installed in high-moisture environments, or if cabinetry or furniture is mounted through the tambour panel into the wall. Always follow adhesive manufacturer's instructions and allow full acclimation prior to installation.

The 1″ Bevel Slat Tambour Thin — the classic profile, built for curves.